Tag: model aircraft

Posted on by

Italeri Releases CANT Z.1007 Alcione Kit With Six New Liveries

Italeri has released a new boxing of their CANT Z.1007bis Alcione model kit in 1/72 scale.

The CANT Z.1007 Alcione medium bomber, designed by Filippo Zappata, entered service in the late 1930s and was extensively used by the Regia Aeronautica during the Second World War. Characterized by a wooden structure, it featured the typical Italian three-engine configuration. More specifically, its three 1,000 hp Piaggio P.XI radial engines allowed the CANT Z.1007 to reach a maximum speed of 450 km/h. The aircraft could carry 1,200 kg of offensive payload housed in an internal bomb bay. The crew typically consisted of five men, which could increase to six with the addition of a photographic operator for reconnaissance and maritime patrol missions. It was mainly employed in the Mediterranean, Balkan, and North African theaters of operation and is often considered the best medium bomber of the Regia Aeronautica.

The kit (1479) includes new decals with marking options for six aircraft. Click below to check out the Buy on eBay, livery profiles and sprues.

Continue reading Italeri Releases CANT Z.1007 Alcione Kit With Six New Liveries

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Italeri Releases Fw 190 A-7/A8 Focused on Luftwaffe Aces

Italeri has released a new boxing of their 1/72 Fw 190 A-7/A8 model kit focusing on Luftwaffe aces.

The Focke-Wulf Fw 190 was one of the best aircraft designed during the Second World War. Produced in more than 20,000 units starting in 1941, it was, together with the Messerschmitt Bf 109, the most famous fighter of the Luftwaffe. The Focke-Wulf Fw 190 A-8 was equipped with a BMW 801 D-2 twin-row, 14-cylinder radial engine delivering 1,700 hp, allowing it to reach a maximum speed of 653 km/h. It was heavily armed with two MG 131 machine guns and four 20 mm MG 151 cannons. In the first months of 1944, the A-8 version entered production, featuring an injection system capable of increasing engine power to over 1,900 hp for short periods. The Luftwaffe’s best pilots flew the famous fighter during the Second World War.

The kit (1490) includes markings for aircraft flown by Major. Maj. Heinz “Pritzl” Bär, Obstlt. Otto Kittel, Major Josef “Pips” Priller, Leutnant Anton Rudolf Piffer and Leutnant Gerhard Vogt. Click below to check out the Buy on eBay and box contents.

Continue reading Italeri Releases Fw 190 A-7/A8 Focused on Luftwaffe Aces

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

FineMolds Releases “Meticulous” New A6M Zero Prototype Model Kit

FineMolds has released their new Mitsubishi A6M Zero prototype model kit in 1/72 scale.

The Zero prototype, designated A6M1, was the first version of the Japanese Navy’s famous carrier‑based fighter, built in 1939 as a lightweight, single‑seat monoplane with retractable gear and an enclosed cockpit to meet strict demands for speed, range, and extreme maneuverability. It used a 780 hp Mitsubishi Zuisei 13 radial engine and a very light airframe of aluminum alloy with fabric‑covered control surfaces, giving it low wing loading and excellent low‑speed handling even in its underpowered prototype form; after Navy trials, the design was refined into the A6M2 by switching to the more powerful Nakajima Sakae engine, launching the Zero’s long‑production run.

The new kit (FR03) “meticulously reproduces the details of the Type 12 Carrier Fighter ‘Unit 2.'” It offers molding in different colors (fuselage, wings, engine, and propeller are in gray, landing gear in black, and interior of the aircraft in yellow-green). PE parts also appear to be included.

Click below to check out the product link and additional images.

Continue reading FineMolds Releases “Meticulous” New A6M Zero Prototype Model Kit

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

MiniArt Releases New Fw 190D-9 (Mimetall) Advanced Model Kit

MiniArt has released their new Fw 190D-9 (Mimetall) Advanced Kit in 1/48 scale.

The offering (48048) is described as highly detailed with accurate Mimetall production configuration, PE parts, detailed cockpit and surface features and decals with multiple marking options.

The company also recently released a basic version (48040) that includes an accurate exterior with finely reproduced panel lines and rivets, detailed cockpit with instrument panel and seat, optional open or closed canopy and marking options for two aircraft of Jagdgeschwader 301.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

First Look: Airscale’s 1/32 Dornier Do 17 Renderings, Test Prints

Airscale has released a series of images showing renderings and test prints for their 1/32 Dornier Do 17, stating that the final design for the injection molded parts have been approved with mold cutting starting next week.

The CAD images are the design with rough panel lines and rivets for the box art coming later, the moulded parts will be more finessed, while the test prints are low res fit tests so the design will evolve from here – for example I am not happy with the floor sections, there are some weak spots so back to the drawing board for that.

The Do 17 was a German twin‑engine light bomber, nicknamed the “Flying Pencil” for its slim, streamlined fuselage, which was originally designed in the early 1930s as a fast mail and passenger aircraft before being adapted into a military bomber for the Luftwaffe. It served extensively in the early years of World War II, taking part in campaigns over Poland, the Low Countries, France, the Battle of Britain, and the invasion of the Soviet Union, where it proved fast and maneuverable but gradually became obsolete due to limited bomb load and range.

It is hoped that the test shots will be complete by September and perhaps full release by the time the Telford model show rolls around in November. Click below to check out a selection of the newly released images.

Continue reading First Look: Airscale’s 1/32 Dornier Do 17 Renderings, Test Prints

Posted on by

Eduard Releases New “Weekend Edition” P-40N Model Kit

Another new release from Eduard for April is a Weekend Edition P-40N Warhawk model kit in 1/48 scale.

The Curtiss P‑40N was the final major production variant of the P‑40 fighter‑bomber, optimized for lighter weight, higher speed, and improved durability. Derivative of the earlier P‑36 and first flown in 1938, the all‑metal P‑40N typically carried six 0.50‑inch machine guns and could also carry light bombs, serving as both an air‑superiority fighter and ground‑attack aircraft. Though often outclassed by newer Axis fighters at higher altitudes, the P‑40N proved rugged and reliable in low‑ to medium‑altitude operations across multiple theaters, including North Africa, the Pacific, China, and the Soviet Union, and over 5,000 N‑models were built, making it the fastest and most numerous late‑Warhawk sub‑type.

The new release (84210) includes Eduard plastic parts and decals with marking options for four aircraft: P-40N-5, Lt. David R. Winternitz, 8th FS, 49th FG; P-40N-5, Lt. Col. Julian E. Thomas, CO of 45th FS, 15th FG; P-40N-20, Lt. Charles G. Whitley, 89th FS, 80th FG and P-40N-20, Lt. J. A. Thomas, 110th TRS, 71st TRG.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Eduard Releases Limited Edition “Mighty Eight” P-51D Kit With 13 Liveries

Eduard has released a new, limited edition “MIGHTY EIGHT: 65th Fighter Wing” P-51D Mustang kit in 1/48 scale.

The new release (11196) includes Eduard plastic parts, pre-painted PE parts, painting masks, resin parts (wheels, two types of exhausts) and Eduard decals with marking options for a whopping 13 aircraft from the 4th FG, 355th FG, 361st FG and 479th FG.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

MikroMir Releases New Junkers Ju-388 L-1 Model Kit

MikroMir has released a new Junkers Ju-388 L-1 model kit in 1/72 scale.

The Ju‑388 L‑1 was a late‑WW2 German high‑altitude reconnaissance variant of the Ju‑388 “Störtebeker.” Optimized for long‑range photo‑reconnaissance at high altitudes, the L‑1 featured a pressurized cockpit, a streamlined glazed nose for cameras, and powerful Jumo 213 engines that gave it speeds around 600–650 km/h (380–400 mph) and a service ceiling well above 12,000 m (40,000 ft). Like the rest of the Ju‑388 series, it entered service only in small numbers during the final phases of the war and saw limited combat, but one captured Ju‑388 L‑1 was later acquired by the United States and is now preserved in the National Air and Space Museum.

The kit includes masks, photoetching and decals. Click below to check out sprue images and the product link.

Continue reading MikroMir Releases New Junkers Ju-388 L-1 Model Kit

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

LukGraph Developing “Truly Special” 1/32 Ansaldo SVA-5 Model Kit

LukGraph has announced the development of a new Ansaldo SVA-5 model kit in 1/32 scale.

The SVA‑5 was the definitive production variant of Italy’s SVA family of single‑seat, single‑engine biplane reconnaissance and light‑bomber aircraft used during and after WW1. Derived from earlier SVA‑2/3/4 models, it featured a streamlined, plywood‑skinned fuselage, a 200 hp SPA 6A inline engine, and a distinctive Warren‑truss wing‑strut layout, giving it high speed and a long range that made it one of the fastest Allied combat aircraft of the war. Armed with two synchronized 7.7 mm Vickers machine guns and capable of carrying light bombs or reconnaissance cameras, the SVA‑5 served as a fast, high‑altitude scout and light bomber on the Italian Front, later seeing use in long‑range missions and limited export service into the mid‑1920s.

The upcoming kit will be released in two separate editions, the first focusing on Italian markings from the Great War period and the second representing an export version of the SVA-5, showcasing aircraft in Polish, American, Spanish, and Russian service. Premium versions will also be offered featuring decals with realistic fabric and wood effects. A 1/48 scale version may follow.

Click below to check out additional renders.

Continue reading LukGraph Developing “Truly Special” 1/32 Ansaldo SVA-5 Model Kit

Posted on by

MiniArt Releases New Tool Fw 190D-9 (Mimetall) Basic Model Kit

MiniArt has released their new tool Focke-Wulf 190D-9 (Mimetall) basic model kit in 1/48 scale.

The Focke-Wulf FW 190D-9 was developed as a high-performance fighter to improve high-altitude capability. Aircraft produced by Mimetall were delivered in late-war conditions and often featured simplified finishes. Machines of Jagdgeschwader 301 were among those flown during the final phase of WWII.

As previously reported, the kit (48040) includes an accurate exterior with finely reproduced panel lines and rivets, detailed cockpit with instrument panel and seat, optional open or closed canopy and marking options for two aircraft of Jagdgeschwader 301.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.