Tag: ibg models

Posted on by

IBG Releases Renderings, Livery Profiles For Upcoming Spitfire Model Kits

IBG has released renderings of their upcoming Supermarine Spitfire PR Type G “Playing with Death” (72600) model kit in 1/72 scale. They have also released seven livery profiles for their upcoming Supermarine Spitfire Mk.Vb Trop “Over North Africa” (72592).

The PR Type G was a fighter-reconnaissance variant of the Spitfire, adapted for low-level tactical photo work rather than pure interception. It carried one oblique and two vertical F24 cameras, kept its armament and armored windscreen, and early examples were converted from Mk I airframes with Merlin II engines later replaced by Merlin 45s; later ones came from Mk V airframes. It entered service in limited numbers and was eventually superseded by the PR Mk XIII, which used the same camera layout with a lower-altitude Merlin 32 engine.

The Mk.Vb was built around the Merlin 45 engine and the “B” wing. It was typically armed with two 20 mm Hispano cannons and four .303 machine guns. The aircraft was a widely used stop-gap that gave the RAF a strong, versatile interceptor through 1941–43, including tropical versions for desert service.

Also slated for release is an ESSENTIALS detail pack (80003) for the Mk.Vb Trop with Vokes Filter. Click below to check out the newly released PR Type G renderings and the Mk. Vb livery profiles.

Continue reading IBG Releases Renderings, Livery Profiles For Upcoming Spitfire Model Kits

Posted on by

Two New Spitfire Kits Plus Detail Pack Coming From IBG in July

IBG Models has announced the upcoming release of Supermarine Spitfire Mk.Vb and PR Type G model kits in 1/72 scale.

The Mk.Vb was built around the Merlin 45 engine and the “B” wing. It was typically armed with two 20 mm Hispano cannons and four .303 machine guns. The aircraft was a widely used stop-gap that gave the RAF a strong, versatile interceptor through 1941–43, including tropical versions for desert service. The PR Type G was a photo-reconnaissance Spitfire variant, stripped of combat armament in favor of cameras and extra fuel for long-range intelligence work.

The kits: Supermarine Spitfire Mk.Vb Trop Over North Africa (72592) and Supermarine Spitfire PR Type G: Playing with Death (72600) will reportedly be available after July 5. Also coming is an ESSENTIALS detail pack (80003) for the Mk.Vb Trop with Vokes Filter. Click below to check out additional images.

Continue reading Two New Spitfire Kits Plus Detail Pack Coming From IBG in July

Posted on by

New IBG Kit Recreates Spitfire Prototype’s Full History For Type’s 90th Anniversary

To celebrate the Spitfire’s 90th anniversary, IBG Models has collaborated with MRM Studio to create a new limited edition model.

The body of the model is based on the IBG plastic kit, but in practice this means a completely new design. Each element has been re-designed to faithfully reflect all the differences between the early prototype and the later production machines. In order to show the evolution of this design as accurately as possible, we have prepared four variants of the aircraft’s nose, two types of fuselage, and two variants of wings – both in the original unarmed configuration and the later armed configuration used during testing. This allows modelers to reproduce the different stages of the machine’s development.

The 1/72 kit employs high-quality 3D printing technology and a vacu-type cockpit canopy with an innovative snap-vac system that uses printed frames that are applied to the transparent part without the need for traditional masking during painting. Additional features include a 3D-printed test pilot figure, Techmod decals and mask designs for painted markings.

The entire edition includes two different sets, which together allow you to recreate the full history of this unique aircraft – from its first flight to its crash on the second day of the war.

The first set (A72001), which depicts the aircraft in its configuration in the first test flight, will be limited to 400 pieces and is slated for release in April. Click below to check out additional images.

Continue reading New IBG Kit Recreates Spitfire Prototype’s Full History For Type’s 90th Anniversary

Posted on by

IBG Releases Limited Edition Spitfire Mk Vb Kit Bursting With Features

IBG has released their new Supermarine Spitfire Mk Vb (North West Europe 1941-44) Black Box Limited Edition model kit in 1/72 scale.

As previously reported, the offering (72591) boasts two full model kits with two comprehensive sets of 3D printed upgrade parts as well as 18 unique, thoroughly researched marking options. The box will also include four fuselages and four sets of wing upper halves allowing builders to represent any two options of the Mk Vb they choose from the box.

Full list of Supermarine Spitfire Mk Vb – North West Europe 1941-44 – Black Box Limited Edition contents:
2x Complete Spitfire Mk Vb plastic model kits (each of them including two different fuselage versions and two different wing upper halves variants)
1x Huge decal sheet with 18(!) marking options (containing 42 roundels and 20 fin flashes to cater for the huge variety included in the box!)
2x 3D-printed cockpit structure insert (with/without additional armour and headrest)
2x Sets of 3D-printed wheels
2x Sets of 3D-printed exhausts (each of them in 4 different variants!)
2x 3D-printed seamless carburetor air intakes
10x 3D-printed rear view mirrors (5 variants, each in 2 copies)
6x 3D-printed gunsights (3 variants, each in 2 copies)
2x Photo-etched frames with some of the smaller details
2x Sets of the most thoroughly researched stencils ever prepared for a Spitfire Mk Vb model in any scale (with separate subsets for Supermarine, CBAF and Westland-produced machines)
2x Sets of painting masks
1x Special bonus

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Now Available: IBG’s New Fw 190D-9 “Jagdgeschwader 301” Model Kit

IBG Models has released their new Fw 190D-9 model kit (72543) in 1/72 scale.

The Focke-Wulf Fw 190D was the final mass-produced version of the company’s famed fighter, representing the culmination of a long line of design evolution aimed at improving high-altitude performance. Although often seen as a late-war development, work on fitting the Fw 190 with an inline engine began as early as 1941 in response to Allied advancements in turbocharged bomber technology. Early prototypes using radial and inline engines (Fw 190B and C) failed due to technical issues, but the introduction of the Junkers Jumo 213 engine revived the project. After extensive testing and modifications to correct stability problems caused by the new engine, the Fw 190D-9 entered production in August 1944, marking a major success. Subsequent variants featuring improved engines were developed, though most remained prototypes due to the war’s end. Between 1,500 and 1,700 Fw 190D aircraft were produced, with only a portion reaching active Luftwaffe units before Germany’s defeat.

As previously reported, the new offering is based on the new tool Focke-Wulf Fw 190D-9 kit (72531 / eBay Product Link) released in 2022, but with markings representing Jagdgeschwader 301.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

IBG to Release New Tool PZL M-18 Dromader Firefighter, Crop Duster Kits

IBG Models is preparing to release a new tool IBG Models 1/48 PZL M18 Dromader model kit in 1/48 scale.

The PZL M-18 Dromader is a Polish single-engine, low-wing utility aircraft designed in the late 1960s and early 1970s by PZL-Mielec, with its first flight taking place in 1976. Originally developed as an agricultural aircraft for crop spraying and fertilizing, it was engineered to be exceptionally robust, capable of operating from short and unprepared airstrips. Powered by a strong radial piston engine and equipped with a large central hopper, the Dromader can carry significant loads of liquid or chemicals, which made it one of the largest and most capable aircraft in its class.

Thanks to its strength, simplicity, and versatility, the Dromader was widely adapted for roles beyond agriculture, most notably aerial firefighting, but also forest protection, pest control, and utility transport. Hundreds of aircraft were produced and exported to dozens of countries across Europe, the Americas, Africa, and Australia. The type earned a reputation for reliability in demanding conditions, including high temperatures and mountainous terrain, and remains in limited service today, particularly in firefighting roles, often upgraded with modern avionics and mission-specific equipment.

The offering will reportedly be released in two boxings representing Greek Firefighter (48004) and Polish Crop Duster (48002) versions. Additional details are scarce, but a series of Crop Duster renderings have been released, additional examples of which can be seen after the break (along with box art).

Continue reading IBG to Release New Tool PZL M-18 Dromader Firefighter, Crop Duster Kits

Posted on by

IBG’s Upcoming Spitfire Mk Vb Has Two Full Models, 18 Liveries, Tons More

IBG Models has announced the upcoming release of a Black Box Limited Edition Supermarine Spitfire Mk Vb (North West Europe 1941-44) model kit in 1/72 scale.

The offering (72591) will contain two full model kits with two comprehensive sets of 3D printed upgrade parts as well as 18 unique, thoroughly researched marking options. The box will also include four fuselages and four sets of wing upper halves allowing builders to represent any two options of the Mk Vb they choose from the box.

Full list of Supermarine Spitfire Mk Vb – North West Europe 1941-44 – Black Box Limited Edition contents:
2x Complete Spitfire Mk Vb plastic model kits (each of them including two different fuselage versions and two different wing upper halves variants)
1x Huge decal sheet with 18(!) marking options (containing 42 roundels and 20 fin flashes to cater for the huge variety included in the box!)
2x 3D-printed cockpit structure insert (with/without additional armour and headrest)
2x Sets of 3D-printed wheels
2x Sets of 3D-printed exhausts (each of them in 4 different variants!)
2x 3D-printed seamless carburetor air intakes
10x 3D-printed rear view mirrors (5 variants, each in 2 copies)
6x 3D-printed gunsights (3 variants, each in 2 copies)
2x Photo-etched frames with some of the smaller details
2x Sets of the most thoroughly researched stencils ever prepared for a Spitfire Mk Vb model in any scale (with separate subsets for Supermarine, CBAF and Westland-produced machines)
2x Sets of painting masks
1x Special bonus

The kit is currently slated for release sometime during the second half of January.

(via IBG Models)

Posted on by

IBG to Release New Jagdgeschwader 301 Fw 190D-9 Kit in 2026

With 2026 fast approaching, IBG Models has taken a moment to announce some of the releases planned for the new year. Among them is a Fw 190D-9 model kit (72543) in 1/72 scale.

At the moment details are limited, but the new offering is apparently based on the new tool Focke-Wulf Fw 190D-9 kit (72531 / eBay Product Link) released in 2022, but with markings representing Jagdgeschwader 301. It will reportedly be available at the very end of January.

(via IBG)

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

IBG Models Releases New Tool Spitfire Mk I (Early)

IBG Models has released their new tool Supermarine Spitfire Mk I (Early) model kit in 1/72 scale. The kit (72580) represents the 1938 and 1939 configurations of the type and includes numerous marking options:

They were carefully selected and thoroughly researched to present not only the wide scope of variations in markings and undersurface finish, but also to capture the most important pre-war events, leading up to the World War 2. You will find here Spitfires from Munich Crisis, March 1939 Crisis and finally from the day of the declaration of war by United Kingdom. We also did not forget about Polish Modellers and included the reconstruction of L1066 – the only Spitfire shipped to Poland. Unfortunately it never got there, but for those who like to use their imagination, we included a what-if Polish markings as well.

The kit also includes plastic and photo-etched parts along with 3D printed wheels, early type fuel tank cover and type G-22 camera gun.

Buy on eBay (eBay)

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.