Category: Aircraft/Parts For Sale

Posted on by

1944 North American TF-51D Project Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1944 North American TF-51 project has been spotted for sale. The listing states (in part):

Complete Logs And Data Plate. Some Parts Usable From The Wreckage, Mostly Wing Parts. Enough To Get Started On Your P-51! Some Out Board Wing Parts Salvageable, Left Side Cockpit Furnishings, And Some Tail Parts. Engine Submerged In Water, But Included.

The project is located in the US (exact location unspecified), and is currently being offered for $79,500 USD, OBO. Click here to check out the complete listing.

(Image: USAF [Public Domain] via Wikimedia Commons)

Posted on by

Wright Cyclone R2600 Display Engine Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A Wright Cyclone R2600-20 has hit the market. The listing, translated from French, states:

R2600-20 14 CYLINDER RADIAL MOTOR WAS ON A GRUMMAN AVENGER TBM3. This engine has been dismantled and cleaned and painted and put anti-corrosion inside. No logs, mags, and carburetor. FOR DISPLAY ONLY

The engine is located in St-Raymond QC, Canada and is currently being offered for C $18,500.00 (approx. US $14,101.68), although bids are also being accepted. Click here to check out the complete listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

“Immaculate Condition” Yak-11/3U “Czech Ride” Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

Yak 11/3RU “Czech Ride” has hit the market. The listing states (in part):

This is modified 1954 Yak 11 rebuilt to Yak 3U configuration by Dan McCue in USA – effort of 12000 hrs. Always kept in heated hangar (+18 deg), immaculate condition, flies regularly 20-30 hrs per year. Only 560 hrs since overhaul on powerplant and airframe. Powerplant: Pratt Whitney R2000 engine with 1450 hp and 3 bladed Hamilton Standard propeller Performance: 220 KTS IAS at 180 l/h Vne 340 KTS 720 liters total fuel capacity in 5 tanks heavy duty disc brakes make operations from 800 m airports

The machine is located in Warsaw, NA Poland. Pricing is available upon request. Click here to check out the complete listing.

(Photo: Public Domian via Wikimedia Commons)

Posted on by

Bushby Midget Mustang-Based P-40 Project Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1/2 scale P-40 based on Bushby Midget Mustang is currently available for sale. The listing states (in part):

This plane does an honest 253 mph at 10,000 ft altitude on a measured course, is fully aerobatic (+/- 9 Gs) has retractable gear, flaps and cabin heat. It has basic flight instruments, no radio and no navigation. It takes off in 400 ft, climbs at 1800ft/min cruises at 180 mph and will fly stably at less than 60 mph. Landing speed is ~80 mph. The wing span is 19 ft 6 inches, length is 16 ft 4 inches, height is 4 ft 6 inches, empty weight is 642 lbs and gross weight is 950 lbs. It has a 23 gallon fuel tank.

The aircraft is reportedly damage free and complete, but “disassembled for transportation and stripping paint.” Continue reading Bushby Midget Mustang-Based P-40 Project Offered For Sale

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Two P-40N Projects Offered For Sale, “Genuine Pacific War Veterans”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

Two P-40N Warhawk project have hit the market in what is described as “one of the largest collections of P-40 projects ever offered for sale.” The listing states (in part):

Project Number 1: Curtiss P40 N5 Warhawk Project, White “17”. (named Spooky) 42-105472. Project Number 2: Curtiss P40 N5 Warhawk Project Yellow “63”. (named Flo-II) 42-105744. C/N: 1316.

The projects are located near Melbourne, Australia and are currently being offered for $895,000. Click below to check out the specifics for each project.

Continue reading Two P-40N Projects Offered For Sale, “Genuine Pacific War Veterans”

Posted on by

Full-Scale Airdrome Aeroplanes Sopwith Camel Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A full-scale Airdrome Aeroplanes Sopwith Camel reproduction which is “currently being test flown” is available for sale. The listing states (in part):

I have decided to list the plane for sale due to work commitments as I will no longer have the time nor commitment to complete the remainder of the test flying phase or sort out any associated issues as they arise. I am hoping that the aircraft will be purchased by someone or a small group of enthusiast that can put in the time that I don’t have.

Listed below are the issues that need to addressed before the final test flying phase can be completed: (a) Prop needs approximately 1.5 inches taken off the tips to increase maximum RPM to 3000/3100 as recommended by Rotec, its currently only achieving 2750RPM in straight and level at full noise. (b) Oil temp not working (could be a faulty sender unit?). (c) Oil temp probe needs changing from tank to return line to get more accurate reading (this should fix dot point B). (d) Tail plane needs a slight shim adjustment as it requires slight forward pressure on the stick to maintain level flight. (e) Cooling ventilation to back of engine needs redesigning to eliminate any fuel vaporisation issues.

The description reports that the machine is powered by a 150 hp nine-cylinder Rotec R3600 radial engine spinning a 90″culver wooden propeller. It is currently registered under RAAus 19-2137 and wears colors representing the machine flown by WW1 Canadian Ace Donald MacLaren. It is located in Toowoomba, QLD, Australia and is currently available for bidding. Click here to check out the complete listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

“Extremely Well Done” Corben Super Ace Project Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A Corben Super Ace project has hit the market. The listing states (in part):

“This is a Corben Ace, only a Project because it’s been in storage. I bought it recently as a package deal and have decided to sell it. I have no logs or paperwork except a clean bill of sale from the Wright Patterson Airforce Museum. I was told it’s a Chevy engine but have no idea. It does turn over. Just got it unloaded and haven’t spent much time to investigate it. Missing the instruments and intake manifold and carb. Other than that it looks complete. Looks like an older build, but extremely well done. Wing tanks and a fuselage tank… Has a little hangar rash from storage on aileron wing root and back of one gear leg NO other damage. Not sure what it is covered with. No prop.”

The machine is located in Big Cabin, Oklahoma and is currently available for bidding. Click here to check out the complete listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1941 Waco UPF-7 Offered For Sale, “Flies Great”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1941 Waco UPF-7 has hit the market. The listing states:

“4650TT, 515 SMOH(R670, 220HP), 55 PROP (WOOD) SNEW, Bendi/King KX 145 COM, Narco AT150 Transponder with Blind Encoder (NO ADS-B), Smoke System, Cleveland W/B, 55 hours since lower wings rebuilt and tail surface recovered and refinished with Poly Fiber Process, Electrical System (14v), Strobe Light on Belly, Nav Lights, Landing Light in RT wing, ANNUAL DUE 12/2020. FLYS GREAT!”

The aircraft is located in Wichita, Kansas and is currently available for bidding. Click here to check out the complete listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

“Good Condition, Fully Operational” Pilatus P2-06 Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

Pilatus P2-06 HB-RAR (S/N 56) is available for sale. The listing states (in part):

Aircraft of the Swiss Air Force that served as trainer, liaison and flight school machine from 1949 to 1980. Military registration number: U136… Good condition, still fully operational. Complete manufacturer’s technical documentation and maintenance tools available.

The airframe reportedly has 2016 hrs TSN, while the Walter Motorlet, Argus AS.410-A2 12-cylinder inverted V engine has 1704 hrs TSN. The machine is located in Switzerland and is currently being offered for USD $180,000. Click here and here to check out complete listings.

(Photo: Rama via Wikimedia Commons)

Posted on by

“Updated, User Friendly” Yak 11 Offered For Sale With Reduced Price

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

1952 Yakovlev/Haley Yak 11 NX2124X (S/N 102146) is currently available for sale with a reduced price.

The machine, described as “one of the most updated and user friendly YAK aircraft available” reportedly has 5,423 hours TTSNEW, while the Pratt and Whitney R-2000-4 engine has 1100 SMOH (60 since lower end overhaul by Anderson Aeromotive in 2013). It is described as including an avionics package, custom 16 gallon oil tank, pre-oil system, outboard wing fuel tanks, Sam Davis custom exhaust system
12” Aluminum oil cooler, spray bar supplemental cooling system, hydraulic disc brakes, light composite nitrogen bottle for gear and flaps and electric retractable tailwheel – locking.

The aircraft is located in California and is currently being offered for $350,000. Click here to check out the complete listing.

(via Courtesy Aircraft Sales Photo: Jack Snell via Flickr)