Tag: Arma Hobby

Posted on by

First Look: Test Sprues For Arma Hobby’s Me 262 A-1a

Arma Hobby has released the first images of the test sprues for their upcoming new tool Me 262 A-1a in 1/72 scale.

As previously reported, the upcoming release will reportedly be offered in several boxings including the Me 262 A-1a Schwalbe, Me 262 A-1a with Wfr. Gr. 21 (with 3D printed rocket launchers), and Me 262 A-2a Sturmvogel.

The company reports that the kit is very close to completion and the sprues are currently being reviewed before pre-orders begin.

Click below to check out the newly released images.

Continue reading First Look: Test Sprues For Arma Hobby’s Me 262 A-1a

Posted on by

First Look: Arma Hobby Hurricane Mk I Test Build

As previously reported, Arma Hobby recently received the final sprues for their highly anticipated new tool Hawker Hurricane Mk I (40015) in 1/48 scale. Since then the company has completed the very first full build of the model and released a series of test build photos.

Since these are test shots, some elements do not yet have all the final milling details, and a few minor short shots and excess plastic appeared during assembly. This is completely normal at this stage — all corrections are already planned and will be implemented in the next few days before the mould enters full production cycle.

Arma reports that everything is coming together beautifully and full production is only days away. Click below to check out additional images.

Continue reading First Look: Arma Hobby Hurricane Mk I Test Build

Posted on by

First Look: Final Sprues for Arma Hobby’s Hurricane Mk I

Arma Hobby has released photos showing the sprues for their highly anticipated new tool Hawker Hurricane Mk I (40015) in 1/48 scale. These are expected to be the final sprue tests prior to launching production and consist of the fuselage halves, updated and corrected radiator / tropical filter for the Mk I version, and the propeller components (two propeller types and three spinners).

The fuselage halves show the full variety of surface textures typical of early Hurricanes: fabric-covered sections, aluminum panels with very fine rivets, dzus fasteners, air intakes and outlets, and ventilation slots. These varied textures and micro-details were among the most challenging parts of the project, which is why we are pleased to see them reproduced exactly as planned in the test shots.

The company states that if test assembly goes smoothly, production will commence “in about a week.” Shipping will hopefully begin before the end of the month. The kit will reportedly include a highly detailed cockpit and canopy parts from the award-winning Hurricane Mk IIb, four historically accurate RAF marking options, high-quality Techmod decals and masks for canopy and wheels. Chick below to check out a selection of images.

Continue reading First Look: Final Sprues for Arma Hobby’s Hurricane Mk I

Posted on by

Arma Hobby Developing New Tool Messerschmitt Me 262A Variants

Arma Hobby is in the final stages of developing a new tool Messerschmitt Me 262 model kit in 1/72 scale.

The upcoming release will reportedly be offered in several boxings including the Me 262 A-1a Schwalbe, Me 262 A-1a with Wfr. Gr. 21 (with 3D printed rocket launchers), and Me 262 A-2a Sturmvogel. To date, the company has released a series of renderings of the model as well as the three sprues.

The clear sprue contains the “Arma Jig” — an assembly/transport stand that allows safe handling of the model both during assembly and when transporting it to a model contest or club meeting. On this sprue we have included an internal armored windscreen, attached not to the canopy but, using special tabs, to the inside of the fuselage. This prevents the glass from getting soiled during gluing. The two grey sprues contain the main parts of the model, including a finely detailed interior of the landing-gear bays — characteristic of the Me 262. You have often asked about the deployed leading-edge slats — a hallmark of this aircraft — and you will find them in our kit. The under-slung armament includes two 250 kg bombs and R4M rockets under the wings.

Additional features will include painting masks and metal ball nose weights. The offering is expected to begin shipping in late December or early January. Click below to check out additional images.

Continue reading Arma Hobby Developing New Tool Messerschmitt Me 262A Variants

Posted on by

Arma Releases New Tool FM-2 Wildcat “Expert Set” Model Kit

Arma Hobby has released its new tool FM-2 Wildcat “Expert Set” model kit in 1/72 scale.

As previously reported, the model will reportedly be released in three boxings, including an FM-2 Wildcat Expert Set (70031), Wildcat Mk VI Model Kit (70032) and FM-2 Wildcat Model Kit (70033). The project will also continue into the F4F-4 Wildcat version at some point.

The new Expert Set kit appears to boast photo etched details and marking options for six machines, including aircraft of VC-8, VC-10, VC-69, VC-96 and 882 Squadron.

Buy on eBay on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

First Look: Arma’s New Tool FM-2 Wildcat Finished Build

Arma Hobby has released a new series of images showing a completed and finished version of their upcoming FM-2 Wildcat model kit in 1/72 scale.

As previously reported, the model will reportedly be released in three boxings, including an FM-2 Wildcat Expert Set (70031), Wildcat Mk VI Model Kit (70032) and FM-2 Wildcat Model Kit (70033). The project will also continue into the F4F-4 Wildcat version at some point.

According to the company, pre-orders will commence on Friday. Click below to check out a selection of additional images.

Continue reading First Look: Arma’s New Tool FM-2 Wildcat Finished Build

Posted on by

First Look: Production Sprues For Arma’s Upcoming FM-2 Wildcat Kit

Arma Hobby has released new images showing the production sprues for their upcoming FM-2 Wildcat model kit in 1/72 scale.

As previously reported, the model will reportedly be released in three boxings, including an FM-2 Wildcat Expert Set (70031), Wildcat Mk VI Model Kit (70032) and FM-2 Wildcat Model Kit (70033). The project will also continue into the F4F-4 Wildcat version at some point.

According to the company, the first version of the model (and last version of the aeroplane) will be available shortly. Click below to check out a selection of the newly released images as well as additional details.

Continue reading First Look: Production Sprues For Arma’s Upcoming FM-2 Wildcat Kit

Posted on by

Arma Hobby to Release Line of New Tool Grumman Wildcat Kits

Arma Hobby has announced that their first project for 2020 will be the release of new tool Grumman Wildcat model kits in 1/72 scale.

The offerings will reportedly be released in three boxings, including an FM-2 Wildcat Expert Set (70031), Wildcat Mk VI Model Kit (70032) and FM-2 Wildcat Model Kit (70033). The project will also continue into the F4F-4 Wildcat version at some point.

The Expert Set has an expected delivery time of February/March 2020, while the remaining two kits will reportedly be released early in the second quarter of 2020. Additional details regarding the kit contents and marking options are currently scarce, but will be “given soon.”

In the meantime, some images have been released, additional examples of which can be seen below.

Continue reading Arma Hobby to Release Line of New Tool Grumman Wildcat Kits

Posted on by

First Look: Arma Hobby’s Upcoming New Tool Hawker Hurricane Mk.IIc

Arma Hobby has released the first test shots of their upcoming new tool Hawker Hurricane Mk IIc model kit in 1/72 scale.

As previously reported, its design is said to maintain the rear fuselage shape, wings and tailplane of the company’s previous Mk I kit, with the rest being “an entirely new project.” This includes a longer fuselage before the cockpit, new fishtail exhaust, a new carburetor inlet, a new (longer) tropical filter cover, two variants of cannon barrels, a modified one-piece propeller design, enhanced landing gear bays with improved assembly of the undercarriage legs, and more. It appears that two livery options will also be included.

The offering is described as “almost ready to release” and will reportedly be available in three versions, including an Expert Set (70035) Model Kit (70036) and a Trop Model Kit (70037). Click below to check out additional images.

Continue reading First Look: Arma Hobby’s Upcoming New Tool Hawker Hurricane Mk.IIc

Posted on by

Arma Hobby Announces Upcoming New Tool Hawker Hurricane Mk IIc Model Kit

Arma Hobby has announced the upcoming release of a new tool Hawker Hurricane Mk IIc model kit in 1/72 scale.

The offering will reportedly be available in three versions, including an Expert Set (70035) Model Kit (70036) and a Trop Model Kit (70037).

Its design is said to maintain the rear fuselage shape, wings and tailplane of the company’s previous Mk I kit, with the rest being “an entirely new project.” A list of improvements is also being incorporated, including: Continue reading Arma Hobby Announces Upcoming New Tool Hawker Hurricane Mk IIc Model Kit