Category: Model Aircraft

Posted on by

Italeri Releases Spitfire Mk IX Focused on RAF Aces

Italeri has released a new edition of their 1/48 Spitfire Mk. IX focused on ace liveries.

The Mk. IX was an interim upgrade to counter the German Fw 190, entering service in 1942 with over 5,600 units produced, making it the second most numerous Spitfire variant. Powered by a more powerful Rolls-Royce Merlin 60-series engine with a two-stage supercharger, it offered superior high-altitude performance, speed up to around 408 mph, exceptional climb rate, and improved structural reinforcements compared to the earlier Mk. V, while retaining excellent maneuverability. Typically armed with two 20mm Hispano cannons and four .303 Browning machine guns (or variations), it served extensively in escort roles, intercepting bombers, and air superiority missions across Europe, significantly restoring Allied dominance during WW2.

The release (2843) includes new decals representing five aircraft flown by RAF aces: F/Lt Pierre Clostermann of 602 Squadron, W/Cdr James E. Johnson of 402 Squadron, F/Lt Jan Falkowski of 402 Squadron, S/Ldr Russell Foskett of 94 Squadron and F/Lt George Beurling of 412 Squadron.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Now Available: Sword Models’ New Tool Short SB.6 Seamew

Sword Models has released their new tool Short SB.6 Seamew model kit in 1/72 scale.

As previously reported, the Seamew was a British lightweight carrier-based anti-submarine aircraft developed by Shorts in the early 1950s to replace the FAA’s Avenger. It first flew on 23 August 1953 but suffered handling problems and shifting defense priorities, which led to limited production and ultimately cancellation after only a small number of airframes were built.

The release (SW72157) is described as “quite large” and includes liveries for XE169 of HMS Warrior and XA123 of HMS Bulwark.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

FineMolds to Release New A6M Zero Kits Representing Prototype and Model 32

FineMolds has announced the upcoming release of two new Mitsubishi Zero kits in 1/72 scale. The offerings include the Mitsubishi A6M Zero prototype (FR03) and Mitsubishi A6M2 Zero Model 32 (FR04).

The A6M1 prototypes of 1939 were lightweight, long-range, carrier-based fighters with a low-wing monoplane layout, retractable landing gear, and a 580 kW Zuisei 13 engine driving an initially two-blade, later three-blade propeller, emphasizing extreme maneuverability and range at the expense of protection. The later A6M3 Model 32, first flown in 1941, introduced the more powerful Nakajima Sakae 21 engine with a two-speed supercharger, a shortened, squared-off wing without folding tips, enlarged wing fuel tanks, and upgraded Type 99 Mark 2 20 mm cannon, trading some of the earlier model’s turning ability and range for better roll rate, higher diving speed, and improved short-range combat performance.

The kits are currently set for release in April. Click below to check out additional photos, kit contents and livery options.

Continue reading FineMolds to Release New A6M Zero Kits Representing Prototype and Model 32

Posted on by

IBG Releases Limited Edition Spitfire Mk Vb Kit Bursting With Features

IBG has released their new Supermarine Spitfire Mk Vb (North West Europe 1941-44) Black Box Limited Edition model kit in 1/72 scale.

As previously reported, the offering (72591) boasts two full model kits with two comprehensive sets of 3D printed upgrade parts as well as 18 unique, thoroughly researched marking options. The box will also include four fuselages and four sets of wing upper halves allowing builders to represent any two options of the Mk Vb they choose from the box.

Full list of Supermarine Spitfire Mk Vb – North West Europe 1941-44 – Black Box Limited Edition contents:
2x Complete Spitfire Mk Vb plastic model kits (each of them including two different fuselage versions and two different wing upper halves variants)
1x Huge decal sheet with 18(!) marking options (containing 42 roundels and 20 fin flashes to cater for the huge variety included in the box!)
2x 3D-printed cockpit structure insert (with/without additional armour and headrest)
2x Sets of 3D-printed wheels
2x Sets of 3D-printed exhausts (each of them in 4 different variants!)
2x 3D-printed seamless carburetor air intakes
10x 3D-printed rear view mirrors (5 variants, each in 2 copies)
6x 3D-printed gunsights (3 variants, each in 2 copies)
2x Photo-etched frames with some of the smaller details
2x Sets of the most thoroughly researched stencils ever prepared for a Spitfire Mk Vb model in any scale (with separate subsets for Supermarine, CBAF and Westland-produced machines)
2x Sets of painting masks
1x Special bonus

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Now Available: IBG’s New Fw 190D-9 “Jagdgeschwader 301” Model Kit

IBG Models has released their new Fw 190D-9 model kit (72543) in 1/72 scale.

The Focke-Wulf Fw 190D was the final mass-produced version of the company’s famed fighter, representing the culmination of a long line of design evolution aimed at improving high-altitude performance. Although often seen as a late-war development, work on fitting the Fw 190 with an inline engine began as early as 1941 in response to Allied advancements in turbocharged bomber technology. Early prototypes using radial and inline engines (Fw 190B and C) failed due to technical issues, but the introduction of the Junkers Jumo 213 engine revived the project. After extensive testing and modifications to correct stability problems caused by the new engine, the Fw 190D-9 entered production in August 1944, marking a major success. Subsequent variants featuring improved engines were developed, though most remained prototypes due to the war’s end. Between 1,500 and 1,700 Fw 190D aircraft were produced, with only a portion reaching active Luftwaffe units before Germany’s defeat.

As previously reported, the new offering is based on the new tool Focke-Wulf Fw 190D-9 kit (72531 / eBay Product Link) released in 2022, but with markings representing Jagdgeschwader 301.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Airscale Releases New “State of the Art” Hawker Typhoon Mk.Ib Hybrid Kit

Airscale has released their new 3D printed Hawker Typhoon Mk.Ib “car door” in 1/32 scale.

Combining state of the art injection moulding with high end 3D parts, this hybrid kit sets the tone for future modellers. Fuselage, wings, tailplanes and clear parts are all injection moulded, while everything else bristles with finely realised 3D detail.

The model is released in partnership with Typhoon Legacy in Canada, and a percentage of sales will go toward their restoration of JP843 to flying condition. Click below for product link and additional images.

Continue reading Airscale Releases New “State of the Art” Hawker Typhoon Mk.Ib Hybrid Kit

Posted on by

Eduard Release ProfiPACK Spitfire F Mk. IX With New Liveries

Adding to the list of new Eduard releases for March is this ProfiPACK Edition Spitfire F Mk. IX model kit in 1/48 scale.

The F Mk. IX was a mid‑war Spitfire variant created as a stopgap by fitting the new two‑stage supercharged Merlin 61 series engine to essentially a modified Mk Vc airframe to counter the Focke‑Wulf Fw 190 in 1942. It retained the classic Spitfire agility but offered much improved speed, climb, and high‑altitude performance. It was typically armed with two 20 mm cannon and four .303 in machine guns in the universal “C” wing. Intended as a temporary solution until more advanced marks arrived, it proved so successful that thousands were built, serving in roles from pure interceptor to fighter‑bomber and remaining a mainstay of RAF fighter units through the later years of the Second World War.

The offering (8282) is reportedly a re-release with new marking options including Canadian and American liveries. It includes Eduard plastic parts, pre-painted PE parts, painting masks and Eduard decals with five marking options.

Buy on eBay (Additional details via AeroScale)

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Eduard Releases Limited Edition, Dual Combo Bf 109K-4 Model Kit

Another new release this month from Eduard is a limited edition, dual combo “Kurfürst” Bf 109K-4 model kit in 1/72 scale.

The Bf 109K-4, known as the “Kurfürst”, was the final production variant of the iconic German World War II fighter, entering service in late 1944 as the Luftwaffe’s most refined Bf 109 model. Powered by a Daimler-Benz DB 605D engine producing up to 2,000 horsepower with MW 50 injection, it achieved top speeds of around 690-710 km/h (429-440 mph) at high altitudes like 7,400-7,500 meters, offering superior climb rates, acceleration, and agility over earlier 109s. Armament typically included one 30 mm MK 108 cannon with 65 rounds and two 13 mm MG 131 machine guns with 300 rounds each, all nose-mounted for precise firing, while its design prioritized ease of maintenance with quick-access panels. Though optimized for high-altitude interception and bomber defense, its aging airframe limited top-speed handling compared to some Allied foes.

Eduard’s new release (2155) includes Eduard plastic parts, pre-painted PE parts, painting masks, and Eduard decals for nine aircraft.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Eduard Releases New Fw 190F-8 Model Kit With 7 Liveries

New this month from Eduard is a ProfiPACK Edition Fw 190F-8 model kit in 1/48 scale.

The Fw 190F-8 was a late-war German ground-attack variant of the renowned Fw 190 fighter, derived from the A-8 airframe with reinforcements to carry up to 1,000 kg bombs or other ordnance. Powered by a BMW 801 radial engine with low-altitude performance enhancements via a modified compressor, it featured armament of two 20 mm MG 151/20 wing-root cannons and two 13 mm MG 131 cowl machine guns. Entering service in 1944, over 6,000 were built, though many served as fighter-interceptors due to the decline of dedicated dive bombers like the Ju 87.

The new kit (82139) includes Eduard plastic parts, pre-painted PE parts, painting masks and Eduard decals with marking options for seven aircraft.

Buy on eBay

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

ICM to Release Do 217M-1 Kit Representing Captured RAF Example

ICM has announced the upcoming release of a Do 217M-1 RAF bomber in 1/48 scale.

The kit (48276) represents a Dornier Do 217M-1 that was captured by the Allies in the spring of 1945 and adopted into the British test program where it was flown in RAF markings to assess performance, handling, and equipment layout. It boasts accurate geometry based on actual Do 217M-1 specifications and a detailed reproduction of the aircraft’s large glazed cockpit.

The kit will be available sometime next month, although an exact release date has not yet been announced.

(via ICM)