Category: Golden Age (1919-1939)

Posted on by

1931 Great Lakes 2T-1A For Sale: “Meticulously Maintained, Factory Original”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A “factory original” 1931 Great Lakes 2T-1A (S/N 250 / N11337) has been spotted for sale. The listing states (in part):

Original Factory Great Lakes 2T-1A 1931.Serial No. 250, Standard Type Certificate, 2929 hrs. Total, Continental 0-300B engine,10 hrs. SMOH, Millennium cylinders.4 aileron conversion, Poly Fiber covering, Cleveland wheels and toe brakes. King KY-97A comm. King KT-76A Transponder, intercom. Paint scheme copies original design. Fresh annual with sale. Stored in heated shop. Meticulously maintained. A great flying and fun airplane. One of very few flying factory originals.

The listing also notes that the machine has a total time of 2929 with an engine time of 10 SMOH and a prop time of 10 SOH. It is located in in Chelsea, MI and is currently availble for US $90,000, although offers are also being accepted. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1931 Great Lakes 2T-1A For Sale: “Original, Meticulously Maintained, Fresh Annual”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1931 Great Lakes 2T-1A has been spotted for sale. The listing states (in part):

Original Factory Great Lakes 2T-1A 1931.Serial No. 250, Standard Type Certificate, 2929 hrs. Total, Continental 0-300B engine,10 hrs. SMOH, Millennium cylinders.4 aileron conversion, Poly Fiber covering, Cleveland wheels and toe brakes. King KY-97A comm. King KT-76A Transponder, intercom. Paint scheme copies original design. Fresh annual with sale. Stored in heated shop. Meticulously maintained. A great flying and fun airplane. One of very few flying factory originals.

The aircraft is located in Chelsea, Michigan and is currently available for bidding. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1938-39 Cessna Airmaster Airframe Projects For Sale: “All Major Items Exist for Both”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

Two Cessna Airmaster airframe projects have been spotted for sale. The listing states (in part):

Two Airmaster projects for sale as one package. Registered aircraft, have logs for both. If looking for a fast economical rare plane that draws crowds at shows this is it. N18796, TTSN: 4463, built 3-14-38. Fuselage frame was restored when I obtained the plane. Wing needs rebuilt. The wing is together but leading edge and trailing edge are coming apart. Spars exist and ribs and plywood need replaced. 165 Warner nose cowl and engine mount. N22PV (originally N20763), TTSN: 938, built 8-9-39. Wing is intact in one piece. Fuselage converted to spring gear in its earlier life. 145 nose cowl and engine mount. The plane left the factory as s C145 but can be converted to a C165.

These planes are offered as a package. Both are rebuildable or make one out of the two. Drawings, patterns, and technical information is available to assist with restoration. I have factory paperwork for both. No engines or props in this package. All major items exist for both planes: vertical fin, rudder, horz. stabilizer, elevators, turtle deck, flaps, gas tanks, oil tank, engine mounts, nose cowls, some instruments, inst. panels, etc.. Most smaller items are with projects also. (Pictures do not show all parts with projects.)

The projects are located in Alva, Oklahoma and are currently available for US $13,900, although offers are also being accepted. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

WagAero J3 Fuselage For Sale: “Covered, Ready for Finish”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A WagAero J3 fuselage has been spotted for sale. The listing states (in part):

WagAero J3 fuselage. Nicely done powder coated WagAero cub fuselage, covered ready for finish. Only the fuselage no gear or control surfaces etc.

The fuselage is located in Bellevue, Ohio and is available for US $8,500, although offers are also being accepted. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Jungster 1 Project For Sale: “Includes All Parts”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A Jungster 1 project has been spotted for sale. The listing states (in part):

This is a Jungster one homebuilt airplane. The design is based off the Bucker Jungmiester and about 80% of the size. Fully aerobatic airplane. The Project includes all parts. There is nothing left to build. The only things left to buy would be small AN hardware and covering supplies. Two wing panels require the leading edges to be installed (leading edges included) along with wing hardware that is also included. There is a low time Lyconing 0235 and wooden propeller included. It is all there Fuselage, wings, tail, controls, struts, wires, fuel tank, wheels with disc brakes, basic instruments, engine, exhaust, and prop.

The project is located in Lonoke, Arkansas and is currently available for US $6,750, although offers are also being accepted. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1934 Fairchild 24 C8C For Sale: “Fresh Annual, Motivated to Sell”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1934 Fairchild 24 C8C has been spotted for sale. The listing states (in part):

FRESH ANNUAL! MOTIVATED TO SELL. BID TO BUY! Engine/Prop: Werner 165, Sensenich; HP: 165 HP; TT: 2399.2; SMOH: 243.2; STOH: 152.2; Exterior Colors: Cream/Maroon; N#: NC14397; No Damage History, Always Hangared, Logs Complete; Avionics / Equipment / Modifications: New Exhaust, New Prop, Generator, ADSB

The aircraft is located in Naples, Florida and is currently available for US $89,900. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

“Well Maintained” 1933 Waco UIC For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1933 Waco UIC has been spotted for sale. The listing states:

1933 Cabin Waco UIC. Continental 670, 110 SMOH. TTAF 3767. Paint 10, fabric 10, interior 9. Garmin 375 Nav /TXPDR, ADS-B in and out, (2) UAvionics AV-30C’s, 5-place intercom, Becker Comm, rare Curtis Reed polished metal prop. Day / night VFR. Well maintained. Would consider trade for a Land Rover, Sports Car or RV-4 and cash towards the Waco.

The aircraft is located in Geneva, Illinois and is currently available for bidding. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1939 Piper Cub Project For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1939 Piper J-3 Cub project has been spotted for sale. The listing states:

TTAF2350, C90 SMOH 315, was ground looped into a snowbank, wood prop strike, crank measures .0001 runout, right wing leading edge spar broke, but can be spliced, some rib & tip damage, aileron OK, left wing aileron and attachment point damaged, fuselage skylight broken & tube bent, the rest of the fuselage appears OK along with motor mounts, firewall, exhaust and landing gear (grove brake conversion). Plane recovered and restored 2005 with new wing spars, ribs, leading edge, fuel tank, pulleys, cables & fairleads. New front & rear seats, new windshield, overhauled engine and new propeller, Marvel carb., new spring loaded sealing push rod tubes, Airtech covering process with Ceconite.

The project is located in Tonasket, Washington and is currently available for bidding. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Aeroplane Heaven Makes FSX/P3D Aircraft Available As Freeware

With the release of the new Microsoft Flight Simulator (MSFS) in 2020, Flight Simulation developer Aeroplane Heaven has announced that they have made the decision to halt all development for FSX and P3D and make their FSX/P3D products FREE to download.

The selection includes a number of legendary warbirds such as the B-17, C-47, Grumman F3F-2, Heinkel HE-111, Hawker Hurricane and Typhoon, SB2C Helldiver and Bristol Bulldog. The developer has arranged for ORBX to carry the free titles exclusively, and they are currently available from the Freeware section of their website.

Click below to check out the complete announcement from Aeroplane Heaven.

Continue reading Aeroplane Heaven Makes FSX/P3D Aircraft Available As Freeware

Posted on by

Airfix Announces New Tool 1/48 Avro Anson Mk.I

Another new tool model to be released as part of Airfix’s 2022 range is this Avro Anson Mk.I in 1/48 scale.

The offering (A09191) will reportedly be available in three schemes and will include a choice of early “blistered” or late smooth engine cowlings, optional sloped and upright windscreen and side glazing parts, finely represented fabric and plywood textures on fuselage and wings and a fully detailed interior with structural framework and all crew stations. The model can also be built with or without the upper gun turret and nose gun.

The kit is currently slated for release sometime this autumn. Click below to check out additional images.

Continue reading Airfix Announces New Tool 1/48 Avro Anson Mk.I