Category: Aircraft/Parts For Sale

Posted on by

1946 Luscombe 8A/E Silvaire Project For Sale: “Very Complete Airframe”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1946 Luscombe 8A/E Silvaire project has been spotted for sale. The listing states (in part):

Serial # 2565, N71138. Early 46 model, built in Dallas TX. Was built as an A model and converted to an E for Continental C85. Logs since 1958 (Have FAA CD of records from day one) -1852 TTSN Last flight was in 77. Current registration and A/W- Straight forward w/o damage. Ragwing. Wings were signed off at one time for recovering. Two 12 gallon wing tanks. Maule tail wheel. Good ailerons, horiz & vert stab, elev, & round rudder. Also a set of spare wings that are incomplete but a lots of great parts. Windscreen, wheel fairings, pedal assy, and cushions. Nose bowl, cowl and dish pan. New door frames. Has a good set of post war wing struts as well. Wing sleeves for recover (preference would be Ceconite myself) Very complete airframe.

The project is located in Kiowa, Colorado and is currently available for bidding. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Static Spitfire Project For Sale: “Needs Finishing, Most Parts Present”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A static Spitfire project has been spotted for sale. The listing states (in part):

Selling this unfinished glass fibre Spitfire replica which has most parts present. It needs finishing on the surfaces and structure it’s not perfect and will need work but it’s there. Includes original 4 spoke wheels, wings elevators, spinner and props.

The project is located in Westbury-on-Severn, UK and is currently available for bidding. Click here to check out the listing on eBay, which includes additional photos.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1948 Ryan Navion Project For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1948 Ryan Navion project has been spotted for sale. The listing states (in part):

1948 Ryan Navion, 3600 TT, 92 SMOH E-225, beautiful in and out, needs wing, cheap!… The engine was given a major overhaul in 2001, with brand new cyinders and a brand new camshaft, as well as everything else being overhauled!… The Hartzell constant speed prop was disassembled and inspected in 2018 and has only 3 hours on it, because of the “incident”. On approach to land into his home strip, the pilot, who is older than the airplane, misjudged the sink rate and the airplane hit treetops on it’s way to a successful wheels landing. The damage was to the wing outer panels, the nosebowl, 1 blade of the prop, and a tweak to the bottom cowl and a ding to the top cowl… Sold with logbooks for the engine since before the 2001 major, for the airframe since 1991 and for the prop since the 1991 and FAA bill of sale

The project is located in Minneapolis, Minnesota and is currently being offered for US $8,950, although bids are also being accepted. Click here to check out the complete listing on eBay, which includes many additional details and photos.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

TF-51 “Tempus Fugit” Offered For Sale

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

1944 TF-51 S/N 44-63865 (N151TF) has hit the market.

The airframe reportedly has 1331.2 TTSN (341.1 Hrs. Since restoration and conversion to full dual control specifications by Square One Aviation, Chino, CA) while the Packard V-1650-9 Merlin engine has 341 SMOH by Vintage V-12s (231 STOH by Glenn Wegman/Roush Aviation). The propeller is a Hamilton Standard 24D50 w/ Paddle Blades (160 SMOH / A.D. complied with 6/2020 next due 6/2026).

All airframe components were completely remanufactured by Square One Aviation (SQ1). The engine mount, wings, tail cone, vertical fin, stabilizer and all control surfaces were completely opened or disassembled for inspection
All parts were inspected, overhauled or replaced, prepped, primed and finish painted before final assembly. The rear seat controls are complete, including primer, starter, mixture, prop, throttle, rudder, brakes, landing gear handle plus a full instrument panel including a Garmin GNC 250XL GPS-COM… Annual Completed 9/2021.

The machine includes an avionics package as well as a lengthy list of SQ1 work. It is located in South Carolina and is available for $4,200,000. Click here to check out the listing.

Photo: Bryce Edwards

Posted on by

1951 Cessna 195A For Sale: “Solid, Well-Maintained”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1951 Cessna 195A described as “solid” and “well-maintained” has been spotted for sale. The listing states (in part):

Airframe: S/N 7716; 2507 TT; Wichita/Canada aircraft that has spent its last six years in Florida; Always hangared; Corrosion X treatment; Brackett air filter STC, Shoulder harness STC, BAS Tow handles STC, Cessna Door actuator; Concorde battery with Battery Minder charger; Circuit breakers; Heavy duty instrument shock mounts; Stainless steel fuel, oil, and brake lines; Jasco Alternator; ELT Batteries due 2/23; Covers; ADLog system, all logbooks since day one; Maintenance, Parts, and Operator Manuals comes with the sale; Damage history in 1956 and 1965; Clean Title. Engine: R-755-B2; S/N 13188; 626 SMOH by Page Airmotive; Total engine time 3004; Compressions 75-78; New engine mounts; Rebuilt distributor-starts on 2nd blade; Air Repair #4 cylinder drain; New engine baffles/upper exhaust shroud couplers. Propeller: 15 SPOH (extensive) by H&D Propeller Service; Total Propeller time 2507; Overhauled governor at same time; New Tachometer

The aircraft is located in and is currently available for bidding. Click here to check out the listing on eBay, which includes a number of additional photos and details.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1940 Waco VKS-7 For Sale: “Excellent Condition”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1940 Waco VKS-7 has been spotted for sale. The listing states (in part):

N29372. Serial number 5230. Continental W670M engine, 240 HP. 55 hours on new engine. Dual controls, wide gear. 70 gal fuel capacity. ADS-B compliant. One radio, no nav equipment. Cleveland brakes.

The aircraft is located in Falmouth, Kentucky and is currently available for US $124,000. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

1954 Beech Bonanza E35 For Sale: “Easy Project, In Very Good Shape”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A 1954 Beech Bonanza E35 has been spotted for sale. The listing states (in part):

1954 Beech E35 SN: D-3850, Last Annual Inspection: September 2020, Total Time: 4634.1 hours… The aircraft engine started making metal and needs the right owner to either repair or replace the engine. Once that is done, you will have a phenomenal aircraft on your hands with lots of upgrades… The airframe is very straight and the aircraft is in very good shape. Maintenance on the aircraft was very consistent and thorough.

The aircraft is located in Greeley, Colorado and is currently available for bidding. Click here to check out the listing on eBay, which includes a lengthy list of features and a number of additional photos.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

A-7 Corsair Simulator For Sale: “Made by Ling Temco Circa 1960s”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

An A-7 Corsair simulator has been spotted for sale. The listing states:

A7 Corsair simulator. Made by Ling Temco, this is a procedures simulator for the Corsair. Made around 1960’s, it was used into the 1970’s during the Vietnam war. Some power supplies and sensitive equipment were removed for security. Makes a great static display for picture taking. Helmet included.

The simulator is located in Lancaster, Pennsylvania and is currently available for bidding. Click here to check out the listing on eBay, which includes a number of additional photos.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

MiG-15UTI For Sale: “Extremely Clean and Very Complete”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A Polish MiG-15UTI has been spotted for sale. The listing states (in part):

2500 TT AIRFRAME, 100 HRS ENGINE (Buyer to validate Polish records); Extremely clean and very complete, one of first imported to country. Stored indoors. Engine is installed and was borescoped prior to our purchase. Wing attachments and tail attachments Non Destructive Tested for cracks by Baron NDT in Jacksonville-no irregularities were noted. Wings and tail feathers were dustless blasted and etched in preparation for paint. This is a very complete project with airframe logs from Poland. Aircraft requires complete reassembly. Canopy glass in good condition. Wheels have been cleaned, etched, painted, and US rubber installed. Great project for someone with the ability. Not many of these left.

The aircraft is located in Saint Augustine, Florida and is currently available for bidding. Click here to check out the listing on eBay, which incudes a number of additional photos.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.

Posted on by

Jungster 1 Project For Sale: “Includes All Parts”

Please Note: This is an archived post. The information presented here may not be current and the associated listing may no longer be active.

A Jungster 1 project has been spotted for sale. The listing states (in part):

This is a Jungster one homebuilt airplane. The design is based off the Bucker Jungmiester and about 80% of the size. Fully aerobatic airplane. The Project includes all parts. There is nothing left to build. The only things left to buy would be small AN hardware and covering supplies. Two wing panels require the leading edges to be installed (leading edges included) along with wing hardware that is also included. There is a low time Lyconing 0235 and wooden propeller included. It is all there Fuselage, wings, tail, controls, struts, wires, fuel tank, wheels with disc brakes, basic instruments, engine, exhaust, and prop.

The project is located in Lonoke, Arkansas and is currently available for US $6,750, although offers are also being accepted. Click here to check out the listing on eBay.

Please Note: This post contains an eBay affiliate link. When you purchase through links on our site, we may earn an affiliate commission.